Call Now 905-631-0837905-389-6610

Your Personal Paradise Starts with A Fox Pool

The team at Fox Pools in Burlington will design your custom pool to transform your backyard into the perfect staycation paradise!

Excavation

Excavation

The pool is excavated removing all fill and is then 'staked out' for the fusion bonded Fox panel layout. Pool stairs/features are placed and wall paneling is fashioned together, centered around Fox Pool’s X-Brace support system.

Wall Assembly

Wall Assembly

The pool walls are leveled and the pool plumbing, individual lines for dual main drain, water return lines and skimmer lines are installed. Interior measurements are established and the pool is prepped for the first stage of concrete.

Foundation

Foundation

Concrete footings are poured at the base of the exterior pool wall and X-Braces; fully encasing the pool plumbing. A structural foundation is poured on the interior of the pool, acting as the first of a two-stage pool floor, engineered to be a free standing structure with or without water.

Coping

Coping

Pool coping (regular or cantilever) along with the bonding wire and exterior features (e.g. deck jets and laminars) are installed/completed in preparation for backfill.

Backfill

Backfill

The pool is backfilled with stone and the work begins on forming the concrete pool apron. Rebar is placed to work in conjunction with our X-Brace technology to create a superior support system for the concrete.

Concrete Decking

Concrete Decking

Sidewalk spec concrete is placed and finished to form a functional pool walk around. If using a stone coping and interlock deck a concrete sub structure is also poured using the same construction techniques.

Bottom Finishing

Bottom Finishing

Hand troweled grout floor is poured to provide a smooth, durable foundation for the pool liner. All measurements have been established and checked to ensure that the liner will fit properly.

Liner Installation

Liner Installation

Liner installation entails a thorough cleaning of the hand troweled bottom ensuring any slight imperfections and all foreign materials are removed, and all seams are sealed. The liner is laid out in the pool; vacuums are strategically placed to draw the air out from behind the liner as the pool fills with water.

Pool Equipment

Pool Equipment

Pool equipment typically takes up a little over a 4' x 8' space. Waterlines are plumbed individually and controlled by valves.

JUMP IN!

JUMP IN!

Fox Pool & Spas Leisure Centre
5430 Harvester Road
Burlington, ON L7L 5N5

Hours:

Monday - Wednesday 8:30AM - 5:00PM
Thursday 8:30AM - 7:00PM
Friday 8:30AM - 5:00PM
Saturday 9:00AM - 4:00PM

Send to a friend

Send the url of this page to a friend of yours

Created by

Legal notice